Hyppää pääsisältöön

Neste Turbo+ NEX 10W-40
Fully synthetic multigrade diesel engine oil

SAE 10W-40
API CJ-4, CI-4 PLUS, CI-4, CH-4, CG-4, CF-4
Caterpillar ECF-3, ECF-2, ECF-1a
Cummins CES 20081
Detroit Diesel 93K218
Deutz DQC III-10 LA
MAN M 3575
MTU Type 2.1
Scania Low Ash

Mack EO-O Premium Plus, Mack EO-N
MB-Approval 228.31
Renault VI RLD-3, Renault VI RLD-2
Volvo VDS-4, Volvo VDS-3

Neste Turbo+ NEX is especially developed for the modern heavy duty diesel engines that has requirement of the American API CJ-4 standard. Its multi-effect additives allow it to be used also in gasoline engines as well as in the most diesel engines.
Neste Turbo+ NEX does not contain any traditional mineral baseoils. It is manufactured
from one of the leading baseoil producers Finnish Neste Oil's NEXBASE® baseoils.
Select your fleet a Neste Turbo+ NEX which are designed to meet latest and next
generation engine oil requirements.
Neste Turbo+ NEX is effective at sustaining emission control system durability where
particulate filters and other advanced aftertreatment systems are used. It has
improved wear protection, deposit and oil consumption control, soot-related viscosity
control, oxidation stability, prevention of viscosity loss from shearing and used oil low temperature pumpability.
Neste Turbo+ NEX exceed the performance criteria of API CI-4, CI-4 PLUS, CI-4, CH-4, CG-4 and CF-4 and can be used in engines which requires those performance levels.
When using API CJ-4 oil with higher than 15 ppm sulfur fuel consult the engine
manufacturer for service interval. API CJ-4 oils are compounded for use in all
applications with diesel fuels ranging in sulfur content up to 500 ppm. However high
sulfur fuel may impact exhaust aftertreatment system durability or oil drain intervals.

-Good cold start performance
-Fuel economy benefits
-Long drain interval
-Low emission

Density kg/m3 15oC 860
Flash Point oC (COC) 229
Pour Point oC -42
Viscosity index 152
Viscosity cSt/ 40 oC 94
Viscosity cSt/ 100 oC 14
Viscosity cP/ oC 5500 / -25
Total Base Number, ASTM D2896 9,2
Sulphated Ash, %-w ≤1,0

Neste Turbo NEX meets also the new Cat ECF-3 specification. Caterpillar
recommends that Caterpillar engines equipped with DPFs use oil that meets the Cat
ECF-3 specification. Neste Turbo NEX can be used in diesel engines where a Volvo VDS-4 oils are required.