Hyppää pääsisältöön

Neste Turbo+ FA-4 5W-30
Fully synthetic multigrade diesel engine oil

PERFORMANCE CLAIMS
SAE 5W-30
API FA-4/SN
JASO DH-2, DH-2F
Cummins CES 20087
Detroit Diesel DFS 93K223

APPROVALS
MB-Approval 228.61

DESCRIPTION
Neste Turbo+ FA-4 5W-30 is new generation engine oil which is especially developed for the newest heavy duty diesel engines that have requirements of the American API FA-4 standard. It exceeds the performance criteria of API FA-4 and also exceeds original equipment manufacturer (OEM) requirements providing high performance in low viscosity heavy-duty applications. Additionally it meets and exceeds API SN gasoline engine specification.
Neste Turbo+ FA-4 5W-30 has lower viscosity at HTHS (high temperature and high shear) +150 °C than API CK-4 oils and it is especially designed for boosting fuel efficiency to meet on-highway greenhouse gas (GHG) emission standards.
As a low SAPS (sulphated ash, phosphorus and sulfur) and fuel saving engine oil, it will extensively sustain equipment emission control systems durability where particulate filters and other advanced aftertreatment systems are used. It prevents filter blocking and helps to maintain engine efficiency.
It's very good low temperature performance improves cold start and sustains proper lubrication ability and engine protection until the engine reaches the driving temperature. Additional high shear stability prevents viscosity loss. It is also maintaining the used oil low temperature pumpability.

Pure base oil, low amount of SAPS (sulphated ash, phosphorus and sulfur) and highly effective additives in Neste Turbo+ FA-4 5W-30 provides excellent engine cleanliness.
Highest quality additives additionally helps to keep the engine clean by controlling formation of deposits and maintaining piston cleanliness. This gives reduced oil consumption and increased engine performance.
Its unique formulation with low viscosity base oil and highly selected additives provides enhanced protection against oil oxidation, viscosity loss due to shear, oil aeration as well as protection against catalyst poisoning, piston deposits, degradation of low- and high-temperature properties, and soot-related viscosity increase.
Neste Turbo+ FA-4 5W-30 contains new generation anti-wear additives which are designed especially for low viscosity oils. Those additives form a strong protective layer on engine surfaces and provide ultimate engine protection during all drain intervals.

FEATURES AND BENEFITS
- Good cold start performance
- Outstanding fuel economy benefits
- Low emission
- Excellent engine cleanliness

TYPICAL CHARACTERISTICS
Viscosity (CCS) @ −30 °C 6400
Density 15 °C 859 kg/m³ ASTM D4052
Flash Point (COC) 200 °C ASTM D92
HTHS viscosity @ 150 °C 3,0 cP ASTM D4683
Noack Volatility 9,8 % ASTM D5800
Pour Point −45 °C ASTM D5949
Sulfated Ash 0,9 w/w % ASTM D874
Base Number (TBN) 10,5 mg KOH/g ASTM D2896
Viscosity @ 100 °C 9,6 cSt ASTM D445
Viscosity @ 40 °C 58 cSt ASTM D445
Viscosity Index 150 ASTM D2270

APPLICATIONS
Neste Turbo + FA-4 5W-30 is suitable for advanced heavy equipment, especially low-emission diesel engines which have API FA-4 requirements. It is suitable for many passenger car engines that have API SN requirements.

The product is not suitable for engines with API CK-4 equipment or older. Please check your equipment suitability according to Performance claims and the Approvals in this product data sheet. Check your car's manual for compatibility.

Note!
When using API FA-4 oil with higher than 15 ppm sulfur fuel, consult the engine manufacturer for service interval. API FA-4 oils are developed for use in all applications with diesel fuels ranging in sulfur content up to 500 ppm. However high sulfur fuel may affect exhaust aftertreatment system durability or oil drain intervals.