Hyppää pääsisältöön

Neste Mould M
Concrete mould releasing oil

Neste Mould M is made of mineral base oils, an aromatic-free solvent, and organic additives. The oil is delivered ready for use and is not allowed to be mixed with water or other oil products.

- Easy to apply
- Protects mould surface from moisture
- Protects steel mould against rust
- Prevents bubble formation in concrete
- Easy mould release

Density 15 °C 832 kg/m³ ASTM D4052
Flash Point (COC) 94 °C ASTM D92
Pour Point −48 °C ASTM D5949
Viscosity @ 100 °C 2 cSt ASTM D445
Viscosity @ 40 °C 6,3 cSt ASTM D445
Viscosity Index 113 ASTM D2270

The best way to apply Neste Mould M is by spraying. Only a thin layer is recommended for moulds, since thick layers do not usually facilitate loosening and may cause problems with later surface finishing.

Neste Muotti M is recommended to be stored at over +10 °C. If it is stored in colder temperatures it should be mixed before use.