¹⁾ The Doctor Test negative ASTM D 4952 is an alternative to the Sulphur Mercaptan Content. In the event of conflict, the Sulphur Mercaptan result shall prevail.

²⁾ Reported including nil or 100 % results.

³⁾ Minimum 38,0 °C by methods ASTM D 3828/IP 170/IP 303. Method ASTM D 56 minimum 40,0

⁴⁾ No “peacock” or “abnormal” colour deposits.

⁵⁾ Can be delivered without additive if agreed and if mentioned in certificate of quality.

⁶⁾ Antioxidants are mandatory in hydroprocessed fuels and must be added immediately after processing. Antioxidants are listed in Annex A.2 of DEF STAN 91 - 091 Issue 17.

⁷⁾ An MDA may be added provided that the nature of the contamination is reported. First addition in refinery max 2,0 mg/l. Where metallic contamination is unproven, the MDA may be used provided that the JFTOT Test is determined before and after MDA addition and reported accordingly.

⁸⁾ Cumulative concentration for re-doping of STADIS 450 is max 5.0 mg/l. If original additive concentration is not known or in case of change of additive, additional for STADIS 450 is max 2.0 mg/l.

The types and approval code from DEF STAN 91-091 concentrations of all additives used, including nil additions should be quoted on quality certificates.

Corrosion inhibitor/lubricity improver and Fuel System Icing inhibitor are not permitted unless agreed by all the participants in a joint system.

The product fulfils the requirements for the Joint Fuelling System Check List Issue 35 and DEF STAN 91-091 Issue 17 Amendment 2.

The product will comply with the spesification according to the procedures described in ISO 4259.

Concerning safe use of the products, we refer to the Safety Data Sheets and User's Guides published by Neste Oyj.

INQUIRIES Neste Retail POB 95 FIN-00095 Neste Oyj, Finland Telephone +358 20 80100