Neste Allrex EP M3
Product number 703311, 703320, 703363
Molybdenium disulphide special grease
- Good mechanical stability
- Extremely good load carrying capability
- Good protection against corrosion
- Multipurpose
Neste Allrex EP M3 is a special grease based on lithium thickener and mineral oil. The grease contains 3 % of Molybdenum disulfide. The optimised composition of Neste Allrex EP M3 makes it a really multipurpose molygrease. The Grease contains also additives against oxidation, corrosion and wear.
Neste Allrex EP M3
Molybdenium disulphide special grease
Performance claims
Neste Allrex EP M3 is a special grease based on lithium thickener and mineral oil. The grease contains 3 % of Molybdenum disulfide. The optimised composition of Neste Allrex EP M3 makes it a really multipurpose molygrease. The Grease contains also additives against oxidation, corrosion and wear.
Applications
Neste Allrex EP M3 is suitable for several applications in industry and moving equipment. 3% of Molybdenum disulfide gives a lot of extra protection for heavy loaded slow moving bearings or sliding surfaces. Additionally the addition of Molybdenum disulfide gives extra protection for bearings under vibrating loads. Note! Neste Allrex EP M3 is not recommended for high or medium speed rolling bearings.
Typical properties
| Density 20 °C | 970 | kg/m³ | IP 530 |
| Thickener | Lithium | ||
| NLGI class | 2 | ||
| Penetration | 265-295 | 0,1 mm | ISO 2137 |
| Base oil viscosity @40 °C | 200 | cSt | ISO 12058 |
| Base oil viscosity @100 °C | 15 | cSt | ISO 12058 |
| SKF Emcor, salt water | <2-2 | ISO 11007 | |
| Water resistance | 0 | DIN 51807:1 | |
| Dropping point | >180 | °C | IP 396 |
| 4-Ball Weld load | 3600 | N | |
| Operating temperature range | -30...+120 °C | ||
| Max momentary temperature | 130 | °C |